2-FLUORO-3-(TRIFLUOROMETHYL)BENZYL BROMIDE
2-fluoro-3-(trifluoromethyl)benzyl bromide
CAS: 184970-25-0
Molecular Formula: C8H5BrF4
2-FLUORO-3-(TRIFLUOROMETHYL)BENZYL BROMIDE - Names and Identifiers
2-FLUORO-3-(TRIFLUOROMETHYL)BENZYL BROMIDE - Physico-chemical Properties
| Molecular Formula | C8H5BrF4 |
| Molar Mass | 257.02 |
| Density | 1.640±0.06 g/cm3(Predicted) |
| Melting Point | 58-62 °C (lit.) |
| Boling Point | 199.4±35.0 °C(Predicted) |
| Flash Point | 96.5°C |
| Vapor Presure | 0.483mmHg at 25°C |
| Storage Condition | under inert gas (nitrogen or Argon) at 2-8°C |
| Sensitive | Lachrymatory |
| Refractive Index | 1.472 |
2-FLUORO-3-(TRIFLUOROMETHYL)BENZYL BROMIDE - Risk and Safety
| Hazard Symbols | C - Corrosive |
| Risk Codes | 34 - Causes burns |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S27 - Take off immediately all contaminated clothing. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 3261 8/PG 2 |
| WGK Germany | 3 |
| Hazard Note | Corrosive/Lachrymatory |
| Hazard Class | 8 |
| Packing Group | III |
2-FLUORO-3-(TRIFLUOROMETHYL)BENZYL BROMIDE - Introduction
2-fluoro-3-(trifluoromethyl)benzyl bromide is an organic compound with the formula C9H8BrF4. The following is a description of some of the properties, uses, preparation and safety information of the compound:
Nature:
-Appearance: Colorless to light yellow liquid
-Melting point:-65 ℃
-Boiling point: 150-151 ℃
-Density: 1.66g/cm³
-Soluble: Soluble in ethanol and ether
Use:
- 2-fluoro-3-(trifluoromethyl)benzyl bromide is a commonly used organic synthesis intermediate, which is commonly used in the synthesis of drugs and pesticides.
-It can also be used as a reducing agent, vulcanizing agent and catalyst in chemical reactions.
Method:
- 2-fluoro-3-(trifluoromethyl)benzyl bromide can be obtained by reacting 2-bromo-3-(trifluoromethyl)benzyl with hydrogen fluoride. The reaction is carried out at a low temperature and in the presence of an acidic catalyst.
Safety Information:
- 2-fluoro-3-(trifluoromethyl)benzyl bromide is an organic halogenated hydrocarbon with certain toxicity. Appropriate safe practices should be followed during handling and use.
-Direct skin contact should be avoided and a well-ventilated working environment should be ensured to avoid inhalation of its vapors.
-Violent reactions may occur when in contact with strong oxidants, so contact with strong oxidants or acids should be avoided.
Please note that when using 2-fluoro-3-(trifluoromethyl)benzyl bromide or other chemicals, correct laboratory procedures must be followed and the safety risks must be assessed on a case-by-case basis, and take appropriate security measures.
Nature:
-Appearance: Colorless to light yellow liquid
-Melting point:-65 ℃
-Boiling point: 150-151 ℃
-Density: 1.66g/cm³
-Soluble: Soluble in ethanol and ether
Use:
- 2-fluoro-3-(trifluoromethyl)benzyl bromide is a commonly used organic synthesis intermediate, which is commonly used in the synthesis of drugs and pesticides.
-It can also be used as a reducing agent, vulcanizing agent and catalyst in chemical reactions.
Method:
- 2-fluoro-3-(trifluoromethyl)benzyl bromide can be obtained by reacting 2-bromo-3-(trifluoromethyl)benzyl with hydrogen fluoride. The reaction is carried out at a low temperature and in the presence of an acidic catalyst.
Safety Information:
- 2-fluoro-3-(trifluoromethyl)benzyl bromide is an organic halogenated hydrocarbon with certain toxicity. Appropriate safe practices should be followed during handling and use.
-Direct skin contact should be avoided and a well-ventilated working environment should be ensured to avoid inhalation of its vapors.
-Violent reactions may occur when in contact with strong oxidants, so contact with strong oxidants or acids should be avoided.
Please note that when using 2-fluoro-3-(trifluoromethyl)benzyl bromide or other chemicals, correct laboratory procedures must be followed and the safety risks must be assessed on a case-by-case basis, and take appropriate security measures.
Last Update：2024-04-09 20:49:11
